How to measure your finger size
- 1
Cut a thin strip of paper or use a non-stretch thread.
- 2
Wrap it comfortably around the base of the finger. Do not pull it too tight.
- 3
Mark the exact point where the strip or thread overlaps.
- 4
Measure the marked length in millimetres. This is your finger circumference.
Match circumference to Indian ring size
| Finger Circumference | Indian Ring Size | Inner Diameter |
|---|---|---|
| 50 mm | 10 | 15.9 mm |
| 51 mm | 11 | 16.2 mm |
| 52 mm | 12 | 16.6 mm |
| 53 mm | 13 | 16.9 mm |
| 54 mm | 14 | 17.2 mm |
| 55 mm | 15 | 17.5 mm |
| 56 mm | 16 | 17.8 mm |
| 57 mm | 17 | 18.2 mm |
| 58 mm | 18 | 18.5 mm |
| 59 mm | 19 | 18.8 mm |
| 60 mm | 20 | 19.1 mm |
| 61 mm | 21 | 19.4 mm |
| 62 mm | 22 | 19.7 mm |
| 63 mm | 23 | 20.1 mm |
| 64 mm | 24 | 20.4 mm |
| 65 mm | 25 | 20.7 mm |
How to measure your wrist size
- 1
Wrap a flexible measuring tape around your wrist just below the wrist bone.
- 2
Keep the tape snug against the skin without compressing it and note the measurement.
- 3
If using paper or thread, mark the overlap and measure it flat with a ruler.
- 4
Add the preferred fit allowance shown in the chart below.
Add allowance to your actual wrist measurement
| Preferred Fit | Add to Wrist Size | Best For |
|---|---|---|
| Snug Fit | 0.5 cm | Close-fitting chain bracelets |
| Comfort Fit | 1.0–1.5 cm | Everyday bracelets |
| Loose Fit | 1.5–2.0 cm | Relaxed movement and charm bracelets |
These charts are general measurement guides. Fit can vary with ring width, bracelet design and personal comfort. Check the product description or contact us when ordering a custom or made-to-order size.
